6” Benchtop Jointer
$349.99
Super sales $50 off on selected tools , no code needed
Free shipping on all machines to lower 48 states.
- No More Cupped Woods. Create perfectly flat surfaces and edges quickly and hassle-free with the Wahuda Jointers. Experience smoother and accurate cuts even on tough or figured woods w/ Wahuda Tools.
- Cutting-Edge Sharpness. Our spiral cutterhead has 4-sided carbide inserts for sharper and quieter cutting precision. The standard blade size also allows for a cost-effective and simple replacement.
- Capable Steady Performance. Wahuda Jointers are powered with a 120V motor with a fixed 12,000 RPM. They are fully capable of handling edging, jointing, flattening, or tapering no matter the surface!
- Solid Built For Your Convenience. Our adjustable and expandable cast iron tables enhance stability even when working on longer, larger pieces, with a fence that tilts from 90 &135° for versatility.
- Perfect For Job Sites Or Small Shops. Depending on your needs or your shop’s size, Wahuda Tools have 6, 8, and 10-inch wood jointers that will do the job right. They’re conveniently movable, too
Features & Specs
Wahuda 6-Inch Jointer
After taking in customers' suggestions over the years, ideas and concerns, from our valued customers, we listened and upped our game!
Following on the success of our previous 6 inch jointer models, we'd like to introduce our newly upgraded 6 " WAHUDA spiral style bench top jointer model 50160CC-WHD.
Still geared towards the budget-minded novice, but very capable of milling stock in a small pro shop, it's manufactured to tight tolerances in a certified ISO 9001 factory and is CSA approved for performance and your safety.
Sporting new cast iron tables, our new 6" jointer only weighs about 48 lbs making it still easily maneuvered around your shop or jobsite. The cast iron tables also provide better stability during operation and are less prone to scratching. Table leveling for coplanar, if ever needed, is still easily achieved via set screws installed in each table. With the 30 inch total table length end to end, and a total depth of just over 17 inches and total height of just over 13 inches, it fits in the smallest of available shop area space.
With the included new spiral style cutterhead, manufactured with the same heavy duty aluminum extrusion over steel inner shaft, you now get the cutting edge sharpness retention from having 12 carbide 4-sided insert tips installed. While being quieter than the straight knife cutterhead noise you have had to endure, you also get the smooth finish on your stock you've been looking for from the spiral design ... even on figured woods. Only having to loosen or remove one mounting screw on each insert, provides extremely quick tip rotation or replacement if the insert becomes nicked, keeping your downtime to a minimum and your project on time.
Our new 6 " jointer has some of the same features as our previous highly touted models. It still has the maximum capacity of 6" width and 1/8" maximum depth of cut, a 2½" included dust port for better chip evacuation, and 4 3/8" high by 19 5/8" long extruded aluminum fence which can be easily tilted from 90 to 135 degrees with ease. It has the same 120V 10 amp AC motor which provides ample power requirements. Included are the push blocks, the tools you need to properly set up and adjust the machine, and a T-Torx wrench to rotate or replace the insert tips.
If our 6" jointer does not have the width or length capacity you are looking for, check out our 8" jointer model 50180CC-WHD or our 50110CC-WHD 10" bench top jointer.
Features
- Powerful 10 Amp 120V motor
Newly Incorporated Spiral Style Cutterhead with 4 Sided 12 carbide Inserts
Sporting new Cast Iron tables
Long extruded Fence with 90 to 135 Degree Tilt - This model 50160CC-WHD benchtop jointer features a cast iron tabletop that provides improved stability and durability, yet even with this heavier material, this small jointer weighs less than 50 pounds. This makes it a cinch to move around in your workshop or at the job site. It's truly a portable jointer.
- Other features of this premium 6” jointer include a 30” end-to-end table length, 17” depth and 13” height. This compact size allows it to fit into even small shop spaces. The new spiral-style cutterhead, made from extruded heavy-duty aluminum over a steel inner shaft, incorporates 12 carbide 4-sided inner tips. These provide smoother cuts and quieter operation. The 19-5/8” long by 4-3/8” wide aluminum-extruded fence easily tilts from 90° to 135°.
Warranty
2 YEAR LIMITED WARRANTY
WAHUDA warrants its machinery to be free of defects in workmanship and materials for a period of two (2) years from the date of the original purchase by the original owner. This warranty applies to products sold in United States only. The warranty does not apply to any product used for professional or commercial production purposes nor for industrial or educational applications. Such cases are covered by our 1 year Limited Warranty with the Conditions and Exceptions.Product Size
Speed
12,000 RPM
Inserts
Max Depth of Cut
Max Cutting Width
Max Stock Thickness
Feed Rate
12 Four-sided Inserts carbide
1/8"
6"
--
--
Tables
Fence Size
Dust Port
Weight
Base
WARRANTY
6 1/4 " x 30 "
4 3/8" X 19 5/8"
2 1/2"
53 lbs.
19" X 11 1/2"
2 YEARS
Video
13 reviews for 6” Benchtop Jointer
You must be logged in to post a review.
Steve C. –
Great value for the price!
Matthew Winstead –
wiseka56 –
Good packaging. Arrived with no damage. Easy assembly/ Tables needed adjustment to make them parallel. Easy instructions to complete that task. I have a maple burl I am machining into lumber for furniture. Pieces I tried out turned out excellent. Highly recommend this jointer.
phenry1206 –
I just received the 6″ jointer. Better than I was expecting. Perfectly set up from the factory. Cast iron tables and carbide for this price!
I have worked some figured maple with great results.
Tim –
I’ve had this jointer for a couple of months now and have used more often than I thought I would. It did take me a while to get it set up. If it’s not set up properly you’re going to be disappointed. This is my first jointer so that’s mostly on me. Great finish and being able to flatten warped and twisted wood is so satisfying. It’s much quieter than my 2 bladed planer. I wanted a cast iron base and this fits the bill nicely. Just make sure you keep it clean and protected or it will rust rather quickly. I was able to polish out any rust rather easily. Overall I’m happy I went with this jointer. It came well packaged with no damage. I would purchase again.
d.u.f.f.y –
I received a 6″ jointer for Christmas from my children. I was finally able to get it into my workshop today and get it set up. I was concerned that the fence would not be very substantial but that is not the case. I was however disappointed that the 6″ model does not have the extension arms. I asked my kids to get me the 6″ model to try to save them some money. If I had realized the extension arms were not included on the 6 inch model I would have added some cash to their purchase and got the 8″ model. Yep, my error, but after watching so many reviews on line and having most reviewers state that the extension arms was one of their favorite features I assumed it was a feature on all models
Kevin Smith –
Wow this is amazing
I purchased this jointer because I have a lot of boards to join for a tabletop and while I have a table saw jig it wasn’t as accurate as I needed. Shipping was fast and when I spent the hour or so putting things together and checking adjustments I ran one board through. This was the moment of truth did I was $400 or was this going to be a game-changer? By the title of the review, I think you can guess it’s a total game changer! The pieces all came out super flat and ready to be squared up on the table saw! Bonus the shavings are nice curly shavings that can be used for packing or for other craft projects! I’m so glad I bought this!
November 2, 2020
mike thompson –
Wahooo!
I consider myself to be a Benchtop Jointer pro. I have owned a Delta 6″ for 15 years and have run tons of material through it. I was thinking of full sized jointer with a helical head and decided that the things I do, Grampa things the old delta did just fine, However this new unit exceeds my expectations I had one worry from watching some videos about outfeed and infeed table not being coplaner , I quizzed the tech support people and they assured me that i would be happy with my purchase. Let me tell you, the jointer could not be better setup. If i have a complaint, it would be the poor quality allen wrench included , but i had a good quality tool and all went well. Easy assembly and top quality output. could not be happier. I did notice that on my 24″ level the coplaner seemed out of adjustment, so I switched to my longer ,hardly used level and was able to see the coplaner was good. use a good quality straight edge, I almost started making unnecessary adjustments.
October 20, 2020
Patrick H –
Awesome Jointer!
To me, this is the best bench top jointer in this price range; Especially considering that you don’t have to pay another $400 or more for such a cutter head that already has installed! Even more, in this new Virus era, they still got it shipped to me in only 3 days, where others’ would take months!All surfaces are nice, and flat, leaving the most perfect surface on wood than I could ever hope for. No regrets on choosing this machine!
July 24, 2020
Paul –
Best jointer for the money but………..
The pro’s and consProValue for your buckSpiral carbide cutterReplaceable carbide cutters and reasonably priced.6″ of cutLarge out and infeed tables for a bench jointerCon4 table leveling set screws per table, 2 close to cutter and twe about 6″ away from cutter. Mine did not come with the out and infeed tables parallel with each other. It is a real pain with the set screw setup to level both tables. Since you have to set up and down and side to side to bring the tables in alignment. You have a large set screw with 2 smaller allen head screws to raise and lower,front to back and side to side. While testing the smaller allen head fill up with dust and might have to be picked out with a sharp object to get the wrench to seat firmly. I’ve spent over 2 hrs if not more with these table adjusters. They are very frustrating especially for a old guy !
June 30, 2020
Chuck –
Model 50160CC-WHD Jointer/Review
Easy set up and excellent results from a bench top modelUsed on reclaimed oak with good resultsWould suggest some type of dust collection system as it makes a lot of small chipsLike the 4 vs 2 side bladesSturdy with the cast iron table was flat and needed no adjustment out of the boxHighly recommended for anyone needing a benchtop jointer
February 5, 2020
Jim –
Wahuda 6″ Jointer
Packaged very well, excellent instructions on how to set-up. First trial pieces came out looking beautiful. Worth the money for sure.
February 5, 2020
Dave –
Best bang for the buck in the market today
No question this is the best bang for your buck in a 6 inch tabletop. Precision cast iron table, large extruded fence that holds position and the 4 sided cutters. None of the competitors offer all those features at this price point. Excellent heavy packaging, thorough setup instructions (although literally everything is self explanatory) and extra 4 sided cutters make this a bargain. Looks like it should hold up well. Highly recommend this jointer.
February 5, 2020